Carton Strippers
deutschenglishfrançaisespañolitaliano
homeproductsmode of workcontact
 
   description

A rotating studded chain strips the exterior trim from the diecut sheets at high speed. The chain is driven by a pneumatic or electric motor. The power-stripper is moved manually from the top of the stack of sheets to the bottom to remove the trim waste.
A cover across the top of the chain prevents damage to the sheets. An air pressure regulator is required to operate the power-stripper. Detailed instructions will be furnished to allow safe operation of the power-stripper, which bears the "CE" symbol.
On the right you can download a video showing the CARTON-STRIPPER in action.
Typical drawing of sheets sections
For prober functioning of the power-stripper the diecuts has to be segregated into trim sections as shown in the drawing. The power-stripper removes the trim section by section at high speed. A section of the stack of 250 sheets high can be removed in one second for instance. This performance results in a substantial lowering of manual stripping cost.

The outside trim must be cut into sections no larger than 250 to 450 mm long. the length is dependent on the number and the deth of cut-outs as well as the shape of sheet. the smaller the number and deth of the cut-outs, the faster the stripping operation will go.
Width of nicks:
up to 300 g/m² = 0,5 mm
up to 600 g/m² = 0,8 mm